PCB/Stencil cleaner C750

C-750 is designed for cleaning assembled PCBs, stencils and screens from flux, oxide and soldering support substances.

Stencil cleaner C750

 Features:

  • Closed loop cleaning process
  • Cleaning chamber with rotating spray arms
  • Cleaning, rinsing and drying in one chamber
  • User friendly touch screen interface
  • Up to 50 recipes with 7 steps each
  • Integrated deionization system

Cleaning process consists of 7 steps:

  1. Cleaning. Pump sucks cleaner liquid from cleaning tank #1 and route it to spray arms in cleaning chamber. From cleaning chamber liquid goes back to cleaning tank #1 through distribution drain valve.

  2. Blowing. Remaining cleaning liquid in pipes and spray arms is blown off by compressed air to cleaning tank #1. After that, distribution drain valve will be switched to drain.

  3. Tap water rinsing. From tap water supply water goes to spay arms in cleaning chamber. From cleaning chamber water goes to drain through distribution drain valve.

  4. Blowing. Remaining tap water in pipes and spray arms is blown off by air to drain.

  5. Final DI-water rinsing. DI-water from cleaning tank #2 goes through integrated deionization system to spray arms in cleaning chamber. From cleaning chamber water goes back to rinsing tank #2 through distribution drain valve. This step can be ended by conductivity sensor installed in drain valve or by time.

  6. Blowing. Remaining water in pipes and spray arms is blown off by air to rinsing tank #2.

  7. Hot air drying.

 Cleaning chamber
Cleaning chamber

 

Rotary spray arms
Rotary spray arm

 Cleaning Rinsing tanks
Cleaning & rinsing tanks

 Touch screen interface
Touch screen user interface

Specification:

 

Capacity, mm
(Screens, stencil, frames, PCB carriers)

750х815х75

Cleaning tank volume, l

 60

Rinsing tank volume, l

60

Cleaning liquid temperature, max,°С

 60

DI-Water temperature, max, °С

40

Hot air drying temperature, max, °С

120

Supply voltage

400 VAC 16A
CEE/3PH/50 or 60Hz

Supply tap water pressure, MPa

 0,3

Supply compressed air, MPa

0,5 (100 l/min)

Exhaust, m3/h

300

Dimensions, mm

 1700х1400х1900

Weight, kg

580